• Aug 10, 2026 News!Vol.18, No. 3 has been published with online version.   [Click]
  • Jun 29, 2026 News!Vol.18, No. 2 has been published with online version.   [Click]
  • Mar 30, 2026 News!Vol.18, No. 1 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8236 (Online)
    • Abbreviated Title Int. J. Eng. Technol.
    • Frequency:  Quarterly 
    • DOI: 10.7763/IJET
    • APC: 500 USD
    • Managing Editor: Ms. Isa Yuan 
    • Abstracting/ Indexing:  CNKI,  Google Scholar, Crossref, EBSCO  etc.
    • E-mail: ijet_Editor@126.com
IJET 2011 Vol.3(4): 388-393
doi: 10.7763/IJET.2011.V3.257

A New Approach for Mitigation of Voltage Dips on MV/LV Distribution Network

S. Sundeep , Trinath .K , Ch. Naga Koti Kumar , P. Linga Reddy

  • dept of Electrical and Electronics Engineering, faculty of CMR Institute of Science and Technology, Hyderabad

Abstract

This paper studies the recovery of voltage after a voltage dip due to a fault in a power network. The instant at which voltage recovery takes place is the instant of fault clearing. Here for voltage dip mitigation a new compensation technique is introduced. It consists of energy storage component, control electronics and solid state switch. It provides varies benefits such as reduction of voltage dip and increase of voltage. Finally the principle of operation of this technique has been presented and the capability has been proved by Matlab/Simulink.

Keywords

  • Power Quality
  • Power Network
  • Voltage Dip and Control Electronics
257-T732

How to Cite

Copied

S. Sundeep, Trinath .K, Ch. Naga Koti Kumar, and P. Linga Reddy, "A New Approach for Mitigation of Voltage Dips on MV/LV Distribution Network," International Journal of Engineering and Technology, vol. 3, no. 4, pp. 388-393, 2011. https://doi.org/ 10.7763/IJET.2011.V3.257

Copyright & License

Copyright © 2011 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Article Metrics in Dimensions

Copyright © 2009-2026. International Journal of Engineering and Technology. Unless otherwise stated. 
E-mail: ijet_Editor@126.com