• Aug 10, 2026 News!Vol.18, No. 3 has been published with online version.   [Click]
  • Jun 29, 2026 News!Vol.18, No. 2 has been published with online version.   [Click]
  • Mar 30, 2026 News!Vol.18, No. 1 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8236 (Online)
    • Abbreviated Title Int. J. Eng. Technol.
    • Frequency:  Quarterly 
    • DOI: 10.7763/IJET
    • APC: 500 USD
    • Managing Editor: Ms. Isa Yuan 
    • Abstracting/ Indexing:  CNKI,  Google Scholar, Crossref, EBSCO  etc.
    • E-mail: ijet_Editor@126.com
IJET 2011 Vol.3(3): 254-262
doi: 10.7763/IJET.2011.V3.234

The Design of Mobile Control Car Security System

Jiwa Abdullah

  • the Dept of Communication Engineering, Faculty of Electrical and Electronic Engineering University Tun Hussein Onn Malaysia, Batu Pahat, Malaysia

Abstract

The present car alarm systems are still of no match to the well-equipped thieves. It is just a matter of seconds to break through the system. This paper introduces and describes the design of mobile controlled car security system offering higher level of car security features. The mobile controlled car security is capable of providing an effective two-way communications between the alarm system and the car owner. This system is able to notify the car owner immediately when intrusion is detected. Additionally, the car owner can remotely control any of the car features anytime at anywhere via a phone call. Based on the GSM positioning concept, this system has the potential to provide car location information to assist in stolen vehicle recovery therefore providing enhancement over the conventional car alarm system.

Keywords

  • Car
  • security;
  • PIC
  • microcontroller;
  • mobile
  • phones;
  • hardware
  • design;
  • firmware
  • development
234-JT347

How to Cite

Copied

Jiwa Abdullah, "The Design of Mobile Control Car Security System," International Journal of Engineering and Technology, vol. 3, no. 3, pp. 254-262, 2011. https://doi.org/ 10.7763/IJET.2011.V3.234

Copyright & License

Copyright © 2011 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Article Metrics in Dimensions

Copyright © 2009-2026. International Journal of Engineering and Technology. Unless otherwise stated. 
E-mail: ijet_Editor@126.com