• Aug 10, 2026 News!Vol.18, No. 3 has been published with online version.   [Click]
  • Jun 29, 2026 News!Vol.18, No. 2 has been published with online version.   [Click]
  • Mar 30, 2026 News!Vol.18, No. 1 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8236 (Online)
    • Abbreviated Title Int. J. Eng. Technol.
    • Frequency:  Quarterly 
    • DOI: 10.7763/IJET
    • APC: 500 USD
    • Managing Editor: Ms. Isa Yuan 
    • Abstracting/ Indexing:  CNKI,  Google Scholar, Crossref, EBSCO  etc.
    • E-mail: ijet_Editor@126.com
IJET 2010 Vol.2(3): 238-244
doi: 10.7763/IJET.2010.V2.127

Mono-alphabetic Poly-semantic Sequence Design for HRR Target Detection

Mohd. Moazzam Moinuddin 1 , Y. Mallikarjuna Reddy 2 , Pasha I. A. 3 , K. Lal Kishore 4

  • 1 Noor College of Engineering and Technology, India
  • 2 Vasireddy Venkatadri Institute of Technology, India
  • 3 Padmasri Dr. B. V. Raju Institute of Technology, India
  • 4 Jawaharlal Nehru Technological University, Hyderabad, India

Abstract

Side lobe suppression is extremely important in precisely determining the weak echo scattering region in the presence of range side lobes. This paper addresses the signal design problem for the detection of single point targets in presence of high density additive noise and Doppler shift in high resolution radar (HRR) application with improved side lobe suppression ratio. The simulation results indicate a significant improvement in terms of noise and Doppler shift tolerance for HRR target detection; compared to conventional binary sequences.

Keywords

  • Hamming backtrack algorithm
  • high resolution radar
  • poly-semantic sequences
  • target detection
127-T213

How to Cite

Copied

Mohd. Moazzam Moinuddin, Y. Mallikarjuna Reddy, Pasha I. A., and K. Lal Kishore, "Mono-alphabetic Poly-semantic Sequence Design for HRR Target Detection," International Journal of Engineering and Technology, vol. 2, no. 3, pp. 238-244, 2010. https://doi.org/ 10.7763/IJET.2010.V2.127

Copyright & License

Copyright © 2010 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Article Metrics in Dimensions

Copyright © 2009-2026. International Journal of Engineering and Technology. Unless otherwise stated. 
E-mail: ijet_Editor@126.com