doi: 10.7763/IJET.2010.V2.110
Estimation of DC Voltage Storage Requirements for Dynamic Voltage Compensation on Distribution Network using DVR
- 1 Department of Electrical Engineering with the
- 2 Department of Electrical Engineering with the Malaviya National Institute of Technology, Jaipur, Rajasthan, INDIA
Abstract
Voltage sags and momentary power interruptions are probably the most significant power quality problems affecting industrial and large commercial customers. The installation of mitigation devices can be seen as a short term solution. DVR is a very effective series-compensation device for mitigating voltage sags. The mitigation capability of these devices is mainly limited by the energy storage capacity. This paper is intended to assimilate voltage capacity of DC storage unit of a DVR with transmission voltage so that the information is available in a convenient manner and can be used as a basis for continued research in this area.
Keywords
- DC Energy Storage
- DVR
- Power Quality
- Voltage Sag
How to Cite
Sunil Kumar Gupta, H. P. Tiwari, and Ramesh Pachar, "Estimation of DC Voltage Storage Requirements for Dynamic Voltage Compensation on Distribution Network using DVR," International Journal of Engineering and Technology, vol. 2, no. 1, pp. 124-131, 2010. https://doi.org/ 10.7763/IJET.2010.V2.110
Copyright & License
Copyright © 2010 by the authors. This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).