• Aug 10, 2026 News!Vol.18, No. 3 has been published with online version.   [Click]
  • Jun 29, 2026 News!Vol.18, No. 2 has been published with online version.   [Click]
  • Mar 30, 2026 News!Vol.18, No. 1 has been published with online version.   [Click]
General Information
    • ISSN: 1793-8236 (Online)
    • Abbreviated Title Int. J. Eng. Technol.
    • Frequency:  Quarterly 
    • DOI: 10.7763/IJET
    • APC: 500 USD
    • Managing Editor: Ms. Isa Yuan 
    • Abstracting/ Indexing:  CNKI Google Scholar, Crossref, EBSCO  etc.
    • E-mail: ijet_Editor@126.com
IJET 2019 Vol.11(4): 245-248 ISSN: 1793-8236
DOI: 10.7763/IJET.2019.V11.1155

Effect of the Flue of Charcoal Retort Kilns on Production Charcoal Using Drum Kilns for Households

Rungtawee Padakan

Abstract—Experiment was carried out to obtain the more charcoal and decreased ashes and exhaust gas after production. Effect of the installation of the flue of charcoal retort kilns on production charcoal was investigated. In this study the product from charcoal retort kilns consists of weight of charcoal, ashes and gas exhaust from process. The charcoal was produced in 0.2 m3 of the vertical drum kilns. The results indicated that weight of charcoal increased 7.38 % whereas the weight of ashes decreased 18 % at the flue was installed within charcoal retort kilns. Moreover, the gas exhaust from process at the flue was installed inside charcoal retort kilns less than the gas exhaust at the flue was installed outside charcoal retort kilns. Furthermore, the efficiency of charcoal kiln where were installed outside and inside of charcoal retort kilns were 29.83 % and 32.63 %, respectively.

Index Terms—Charcoal production, flue, drum kiln.

Rungtawee Padakan is with the Department of Mechanical and Manufacturing Engineering at Kasetsart University Chalerrmphrakiat Sakonnakhon Province Campus, Thailand (e-mail: rungtawee.pad@ku.th).

[PDF]

Cite: Rungtawee Padakan, "Effect of the Flue of Charcoal Retort Kilns on Production Charcoal Using Drum Kilns for Households," International Journal of Engineering and Technology vol. 11, no. 4, pp. 245-248, 2019.

Copyright © 2009-2026. International Journal of Engineering and Technology. Unless otherwise stated. 
E-mail: ijet_Editor@126.com